NORMAQUICK® V2
Quick Connectors
NORMAQUICK® V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry.
Two types of NORMAQUICK® V2 connectors ( 0° and 90°) are available as standard versions
| Nominal width (inside diameter of the PA pipe to be connected) in mm |
0° |
90° |
| 4 |
X |
X |
|
6 |
X |
X |
|
7 |
X |
X |
|
8 |
X |
X |
|
10 |
X |
X |
|
12 |
X |
X |
|
15 |
X |
X |
|
19 |
X |
X |
|
25 |
X |
- |
|
27 |
X |
X |
|
33 |
X |
- |
Enquiries / ordering
When making enquiries or placing orders please state as follows: :
| 1. Type | 2. Nominal width
(outside diameter of the spigot) |
3. Type | 4. Application | ||
| Example | NORMAQUICK | V2 | 10 | 90° | fuel |
Special installation dimensions may require the dismantling ring to be oriented at an angle which deviates from that of the standard version.
For such cases we supply quick connectors with dismantling rings oriented at the following angles:
- NORMAQUICK ® V2-NW 19 with dismantling ring oriented at an angle of:
- 15°, 30°, 45° etc. in steps of 15°-Schritten
- 15°, 30°, 45° etc. in steps of 15°-Schritten
- NORMAQUICK® V2-NW 27 with dismantling ring oriented at an angle of:
- 10°, 20°, 30° etc. in steps of 10°-Schritten
The drawings show the principle as exemplified by the NORMAQUICK® V2 NW 19, -90° quick connector:
During the last couple of years we have built up a selection of approx. 200 special / customised connector types.
We will be pleased to inform you in more detail on request.