NORMAFIX® NORMETTA®
Continuous band clamping system
The NORMAFIX® NORMETTA® clamping system consists of a continuous band which fits nearly any shape and size of the objects to be retained or clamped. In addition there is a choice of five different closure types (buckles).
The NORMAFIX® NORMETTA® clamping system is particularly suitable for fixing and/or repair purposes under difficult or extraordinary conditions.
We supply the continuous band in 30 m coils either as smooth band in various band widths or as stamped worm-drive band (only 13 mm) in different material qualities.
You can choose from 5 closure types:
NB-A Material: W1
for band width 5, 9 mm
Buckle type NB-A
is suitable for lighter applications such as fixing smaller signs and sealing low-pressure hoses.
Reusable.
Required tools: Steel pin, 90° offset screw driver or pliers, tin snips.
NB-B Material: W1
for band width: 9 mm
Buckle type NB-B
Application: Same as NB-A.
Reusable.
Required tools: Spanner, SW 8 or screwdriver, tin snips.
NB-D Material: W4
for band width: 9, 13, 16, 19 mm
Buckle type NB-D
is suitable for fixing signs, containers and pipes as well as for sealing hoses.
Required tools: Tightening and cutting tool, hammer.
NB-G Material: W1, W3
for worm-drive band
Buckle type NB-G
for worm-drive 13 mm band. Suitable for applications in tight conditions.
Reusable.
Required tools: Screwdriver or hexagonal wrench SW 7 and tin snips.
NB-H Material: W4
for band width: 9, 13, 16, 19 mm
Buckle type NB-H
is an adjustable quick-release buckle and enables quick and simple assembly and disassembly.
Reusable.
Required tools: Screwdriver and tin snips.
Materials
|
W1 |
W2 |
W3 |
W4 |
W5 |
|
X |
|
X |
X |
|