PLAST GRIP Type Series

The NORMACONNECT® PLAST GRIP design features:

1. Standard steel band insert

Thanks to the reinforcing steel band insert the coupling can be used for compensating large pipe gaps and it is suitable for vacuum applications. In addition, the shear strength of the coupling is increased..

2. Lock bars

For the NORMACONNECT® pipe couplings bars with extra large diameter are used. This considerably improves the rigidity of the coupling as well as the engagement of the bolt threads.

3. Anchoring ring

The progressively acting anchoring ring features flat multi-row 'teeth'  that are pressed into the pipe surface. The force applied is evenly distributed over a wide area without damaging the pipe.

4. New double lip seal

The patented sealing system provides double safety.

5. Optional support sleeve

For the joining of plastic pipes we always recommend to use the NORMACONNECT® support sleeve. In case of soft thermoplastic pipes (e. g. PE) the use of the reinforcing support sleeve is mandatory. The support sleeve is inserted into the pipe end and protects the joint from being deformed.

When making enquiries or placing an order please specify:

Example 

1. The type (PLAST GRIP): PLAST GRIP

2. The required material (W2, W5): W5

3. den The outside pipe diameter OD (ref. Table): 90

4. The required sleeve material (EPDM, NBR): EPDM

According to this example the order text would read:

NORMACONNECT® PLAST GRIP - W5 - 90 - EPDM

The order reference for the support sleeve shall be as follows:

Example

1. Outside pipe diameter (OD): 90

2. Material: W5 (1.4571)

3. Internal diameter (di): 79.5

For this example the order text would read:

support sleeve 90 - W5 - 79.5